GESS SYMPHONIE, Manual, Page: 70 / 80

69 Usage of controller
Power on, and operate the mains switch of massage chair to "I" position. The
massage chair is located in reset state (make sure the backrest is in the highest
position and the footrest is in the lowest position). At this juncture, the chair will
enter the stand by state. Only backrest, calf rest and elevation adjustment
functions are available for this holding state.
1. Startup the chair massaging function/Stop
While the chair is on reset condition, press on this button. The controller screen
will twinkle and the backrest and calf rest will recline to a comfortable angle.
Then users can put any buttons to enjoy timed massage. Press the ON/OFF
button again to turn off. The massage chair will stopped massaging while the
time is up and restore to resetting condition via put ON/OFF button again.
2. Zero gravity
Press this button to start zero gravity function .Place humanbody in the least
stressful position to relax fatigue and relaxse pressure.Making the mainpulator
and airbags do full body massage.
3. Program Memory
Please select the favorite massage functions, backrest angle, calf rest angle,
speed and then press the memory function button over six minutes since when
the keypad tone rings.It will memorize the functions on that button and enjoy
this memory massage any timevia pressing this button. There are two custom
selection buttons for your favorite. Users can rechange the recorded functions via
same operation as above.
Hour
Min
Remainingtime Auto
Min
Shoulder
Adjust
3D
Vol
Speed
Width
Intensity
Lower body
Foot&Calf
Buttocks
Arm
Ease
Adjust Backrest
Adjust Calfrest
Adjust Shoulder
Leg Extend
Mechanical
pressure
Relax
Decomp
-Ression
Bodycare
Back
&Waist
Shoulder
&Neck
Heat
Therapy
Air
Whole body auto massage
Partial Auto massage
On/off Operation
1
3
2
16
36 38 34 31 30 27 26 25
23
24
29 32 33 28 22 21 20 19 18 17
8
7
6
5
4
15 14 13 12 11 10 9
D
eutsch
English
Ру
сский