gesko Ikarus 1200s, Instructions For Use Manual, Page: 33 / 48

Instructions for use
9
English
Setting the pause time
You may adjust the duration of the pause time which can be inserted into the dialling
process by means of the WWH key (further information about this function you will
find in the section “Making calls with the ikarus telephone”) to 1 second or 3.6 seconds.
Press the PROG key for two seconds if you are not yet in the programming menu and
then the DEL key several times until you will see PAUSE ZEIT (PAUSE TIME) on the
display.
SET PAUSE TIME
Press the DEL key to confirm your selection. Pressing the keys
▲
or
▼
will select the
correct pause time.
[3.6SEC] 1SEC
Confirm your selection with DEL .
LED flashing frequency
After having set the pause time, you can decide on the flashing frequency of the light
emitting diode which informs you about any new incoming calls.
Press the PROG key for two seconds if you are not yet in the programming menu and
then the DEL key several times until you will see LED BLINK ZEIT (LED FLASHING TIME)
on the display.
LED FLASH PERIOD
Press the DEL key to confirm your selection. Depending on the desired flashing
frequency of the light emitting diode, you can adjust the value for the pause duration
until the next flash will appear in seconds steps with the keys
▲
or
▼✎
‘AUS’ (OFF)
means tha the light emitting diode remains dark and will not flash.
OFF 1 2 [4] 8
Press the DEL key to confirm your selection.