GB-1
GB
Safety instructions . . . . .44
Description of the
high pressure cleaner . . . . .1
Operation and
starting guide . . . . . . . . . . .2
Assembling before start . . .2
Starting . . . . . . . . . . . . . . . .2
Stopping . . . . . . . . . . . . . . .2
High pressure hose . . . . . . .2
Turbo Laser . . . . . . . . . . . .2
Fine sand filter . . . . . . . . . .2
Detergent application . . . . .2
Maintenance . . . . . . . . . . . .3
Oil level . . . . . . . . . . . . . . .3
Oil change . . . . . . . . . . . . .3
Water filter . . . . . . . . . . . . .3
Turbo Laser . . . . . . . . . . . .3
Frost protection . . . . . . . . . .3
Cleaning . . . . . . . . . . . . . . .3
Technical data . . . . . . . . . .3
Fault finding . . . . . . . . . . . .4
INTRODUCTION
Allow us to congratulate you
on your new high pressure
cleaner. We are confident that
your new high-pressure clea-
ner will fully come up to your
expectations from a high pres-
sure cleaner produced at one
of Europe’s foremost high
pressure factories. Gerni A/S
cover all industries with a
complete range of cold and
hot water cleaners and a wide
range of accessories.
In order to ensure that you
derive the full benefit from
your high pressure cleaner,
please study the following
manual.
The manual is part of your
high pressure cleaner and
should always be within the
reach of the operator. The
manual provides a brief
account of the construction
and operation of the high pres-
sure cleaner.
All high pressure cleaners are
constructed for simple and
quick operation. If problems
occur, which you cannot solve
yourself with the aid of this
manual, please contact our
service department, whose
experience and expertise will
be at your disposal.
By following the instructions in
this manual you will ensure
economical and reliable opera-
tion of your high pressure cle-
aner.
In the manual references to
pictures will be indicated as
e.g. (2.6) which means that
reference is given to picture
No 2 and object No 6 (in this
instance: the high pressure
hose).
Type: . . . . . . . . . . . . . . . . . .
No.: . . . . . . . . . . . . . . . . . . .
Date of purchase: . . . . . . . .
OPERATING GUIDE
DESCRIPTION
Your new high pressure clea-
ner is constructed as shown in
the functional diagram and
photograph No. 2. The machi-
ne consists of petrol engine
(2.1) driving the high pressure
pump (2.2). Through the water
filter (2.4), the pump sucks the
water from the water supply
(2.3) and into the top piece.
The pump will pressurise the
water and force it out of the
pressure outlet (2.5), the high
pressure hose (2.6), the pistol
(2.7) and out through the
Turbo Laser nozzle (2.8).
The pressure of the machine
may be adjusted by the pres-
sure adjusting handle (2.9)
and read on the pressure
gauge (2.10). Releasing the
pistol handle (2.7) will cause
the water to flow via the by-
pass valve (2.11). If the water
pressure should exceed nor-
mal operating pressure the
safety valve (2.12) will open
for circulation and prevent
damage to the high pressure
cleaner.
2.1
Petrol engine
2.2
Pump
2.3
Water supply
2.4
Water filter
2.5
Pressure outlet
2.6
High pressure hose
2.7
Pistol
2.8
Turbo Laser
2.9
Pressure regulation
handle
2.10
Pressure gauge
2.11
By-pass valve
2.12
Safety valve
2.13
Detergent supply
(600P)
2.14
Detergent valve (600P)
2.15
Oil glass/pump
2.16
Waste oil
container/pump
2.17
Oil rod/pump
2.18
Oil rod/engine
2.19
Petrol tank
2.21
Ignition switch
2.21
Start cord
2.22
Gas regulation handle
2.23
Choke
2.24
Petrol cock
