VersaFlow
TM
Compounding Aseptic Isolator
User Manual
31
Available Options
Electronic Height Adjusting Stand
The electronic height adjusting stand is powered by a motor housed at the back of the VersaFlow. Hydraulic lines
run to a cylinder at each caster and are pressurized to move the work area up and released to lower it. This action
is activated by a switch located under the work area on the outside of the unit. Direction is indicated by arrows
on the switch.
The electronic adjusting stand requires its own power outlet/plug.
The electronic adjusting stand allows the user to program up to four height settings.
*When using the height adjustment it requires a five minute rest period between adjustment cycles.
Sealed Data Port
The next page gives instructions on how to use the sealed cable pass through if your unit is so equipped. You will
find the vial of lubricant that is mentioned in the instructions in your maintenance kit.
Use caution when setting the pass through up as it is mounted in the plastic side panel. Replacement cable
modules are available if your needs change in the future, contact Germfree for more details.
Additional Options
• Stopcock - located on the right side of the work area
• Starter Kit
• Stainless Steel Waste Container
• Monitor Arm
• Combination Monitor and Keyboard Arm
• Additional Pair of Sleeves
• GRx Glove System
• GRx Glove System with Sleeves