background image

5

GENERAL SAFETY (CONT.)

• If you notice any unusual odors or smoke around the unit, immediately  
  disconnect the unit from the outlet and contact the service center. Failure to do
  so may result in fire or electric shock.
• When not using the unit for long periods of time or when you are
  moving the unit. Please disconnect the product from main power.
• Please beware that Dust could accumulate over time on the unit and cause it 
  to generate heat and or deteriorate insulation, which in turn may result in an 
  electrical fire.
• The product is not intended for use by persons (including children) with 
  reduced physical, sensory or mental capabilities, or young children of any age,
  They must be supervised product by a person responsible for their safety.
• To maintain the product do not use any chemical or cleaning agent or wet 
  cloth, please only ensure to utilize a dry cloth to wipe it down from marks or 
  dust and only after unplugging the product from the power socket.
• Please ensure to contact our call center for any repair or service required for  
  the products.

Please make sure upon positioning this product, the place is:

• Not wet or damp and Well ventilated.
• Placed on a stable surface to avoid product from tipping over. 
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not place this equipment in a confined space such as a bookcase or similar 
  unit. Allow 20cm above and 5cm spacing on both sides for proper ventilation.
• Do not place the Product near heat sources such as radiators, stoves or other 
 audio visual equipment that produce heat.
• Do not place small metallic objects near the unit. 
• Do not use or store flammable or combustible materials near the unit. Doing so 
 may result in fire or explosion. Do not place any naked flame sources, such as lit 

  candles, cigarettes or incense sticks on top of the product.

Summary of Contents for KF16













Reviews: