background image

2. Notice Before Use

1. Keep out of reach of infants and young children. Do not let infants and young

    children play or use this product.

2. Do not place near fire sources such as cooking stoves, stoves, or high 

    temperatures.

3. Do not modify, disassemble, or repair the product yourself to avoid damage

    or danger.

4. This product is used for food insulation and cold preservation. Do not use it 

    for other purposes.

5. Do not leave it in direct sunlight for long periods of time.

6. Please ensure that the cover is screwed on tightly during use to avoid food 

    leakage and burns.

7. When using with food, please note do not shake the product to avoid spillage 

    and burns.

8. Please use it with the lid set assembled.

9. Do not overfill the product to avoid spillage.

10. The contents may be very hot, please use it carefully.

11. Do not place the product on its side to avoid food leakage.

12. The stopper gasket must be assembled during use.

13. Please eat the food as soon as possible, and please eat it once to avoid 

       spoilage.

14. Do not remove the sticker on the bottom of the product to avoid rust or

       damage.

15. If you want to put in dairy products or cold soup, please preheat the food 

       beforehand to avoid spoilage

16. The product should not be placed in a dishwasher, microwave or refrigerator.

17. Do not put the following items: dry ice, carbonated drinks, juice, or raw food.

18. Please avoid long-term insulation or cold preservation, and clean all 

       accessories immediately after use.

19. If it cannot be thoroughly cleaned after use, rinse the inside of the product 

       with water to keep clean.  It will and rust and performance degradation.

20. To prolong product life, avoid impact and dropping on the floor.

21. Do not put other containers in the product.

22. When shaking the product, you will hear a sand like sound, which is normal.

23. Do not cook uncooked raw meat or seafood in the product.

1. Disassemble the lid set before cleaning. Thoroughly clean the product and

    lid set with a mild detergent.

2. Dry with a cloth after rinsing, dry when disassembled then reassemble.

3. The product should not be placed in the dishwasher for cleaning.

4. To remove stubborn stains, mix two teaspoons of baking soda with warm 

    water and pour in food jar, let sit for one hour, and rinse thoroughly.

4. Cleaning and Maintenance

5. Specifications

Model
Dimensions
Packing Dimensions
Net Weight
Gross Weight
Capacity
Temperature Range

VFJ-250
(H)168 (W)93 (D)93 mm
(H)176 (W)95 (D)95 mm
382 g
480 g
500 ml
0-100°C

3. How to Use

1. Unscrew and remove the top lid

    of the product, unscrew top lid 

    cover.

2. Pour in hot water (cold water), cover and 

    preheat (pre-cool) for a few minutes, then 

    drain the water.

3. Put food or liquid in the product, be careful not 

    to overfill it. Do not exceed the position shown 

    below. Excess foods or liquids will cause spills 

    when closed.

4. Close the lid and tighten to ensure there are 

    no leaks.

2. Close the lid cover and tighten, 

     screw on top lid cover.

1. Remove the lid set from the

    product.

2. Remove the stopper gasket.

1. Assemble the stopper gasket.

    The slit of the stopper gasket is 

    aligned with the bumper of the lid.

* Please note that the stopper gasket 

    should not be turned upside down.

Note

1. It is recommended to add hot water (cold water) before use to preheat (pre-cool) the product to 

    enhance the insulation effect.

2. To prevent spillage and leakage, make sure the stopper gasket is properly assembled and attached 

    to the lid before use.

Lid Set Disassembly Method

Lid Set Assembly Method

Top lid

Stainless Steel

Container

Top Lid Cover

Top lid

Stainless Steel

Container

Top Lid Cover

Top lid

Stainless Steel

Container

Top Lid Cover

Top lid

Stainless Steel

Container

Top Lid Cover

Top Lid

Top Lid Cover

Stopper Gasket

Folding Spoon

Stainless Steel Container

Lid Set

1. Product Overview

VFJ-250_M_18(1)

Reviews: