German pool SGV-2613, Instruction Manual

Page: 25 / 32

P.25
How to Use
Control Panel ON / OFF
1. Turn on the main power switch.
2. Press the button for 1 second, control panel will be activated.
3. Press button for 1 second again to turn off the control panel.
Lamp ON/OFF
Press button when the appliance is in standby or cooking mode. Turning ON the lamp allows you to
check the cooking status, the lamp will turn off automatically after a few seconds.
Steam mode
Example: 20-minute steaming at 100
o
C
1. Make sure the water tank is filled with water.
2. In Standby mode, press button.
3. Preset temperature is 100
o
C, press button to confirm.
4. A Preset temperature of 5 minutes is displayed, press button to adjust the temperature to 20 min -
utes, press button to start.
Steam Grill mode
Example: 20-minute steaming at 90
o
C
1. Make sure the water tank is filled with water.
2. In Standby mode, press button.
3. Preset Temperature of 180
o
C is displayed, press button to adjust temperature to 90
o
C, press button
to confirm.
4. Preset time of 5 minutes is displayed, press button to adjust the time to 20 minutes, press button
to start.
Tips : When the cooking process starts, it will take a few minutes to reach your target temperature, you
can press button to switch between time /temperature display. When temperature is displayed,
if is blinking, it means the cavity temperature is rising, when the temperature reaches your
target, the symbol will light on and a beep sound will follow.
If your recipe has a preheat procedure, please put in the food after the beep sound.
When the oven temperature reaches the target, the oven will automatically maintain a constant tem-
perature.