342079
• Set the desired refrigerator temperature with the
A
knob. The
temperature can be set in the range from
min
. to
max
.
• Recommended setting of the thermostat knob is on the
eco
position.
• If the temperature of the room in which the appliance is
installed is lower than 16°C or if there is less than 10 kg of
food in the freezer, we recommend setting the thermostat
knob to
max
. position. The fan should be switched off. This is
required in order to provide adequately low temperature in the
freezer to allow long-term storage of frozen food.
• If the temperature in your home is higher than normal, we
recommend activating the fan boost by pressing the
C
key.
• While the settings are being changed, the display will fl ash
and an acoustic signal will indicate each change to the set
temperature. When the fl ashing stops, the most recent setting
is stored in the memory.
• When turning on the appliance, the display
G
will fl ash
for a few seconds – to show the set value. Then, actual
or maximum value is displayed. In case of the latter, it is
displayed until the temperature in the refrigerator falls below
that value.
• Press the
C
key to activate the fan boost (signal light
D
will
light up).
Use this function to reduce condensation (dew) on interior
walls, temperature differences between particular sections of
the appliance, or in case of higher environment temperature.
The fan will only operate when the refrigerator door is closed.
• Use this setting after switching on the appliance for the fi rst
time, before cleaning, or when inserting a large amount of
food.
Switching on the freezer boost (super freeze) function:
-
Control unit 1
: Press the
E
key (signal light
F
will light up).
-
Control unit 2
: Rotate the
A
dial to position ( ).
The setting will be switched off automatically after approximately
two days.
Setting the refrigerator
temperature
Activating the fan boost
(only with control unit 1)
Super freeze function
10