German pool REF-195, User Manual, Page: 6 / 19

P.11 P.10
7. Refit the bracket fitting the bottom hinge pin. Reinstall the adjustable foot.
8. Place the door back on. Ensure the door is aligned horizontally and vertically so that the seals are
closed on all sides before finally tightening the top hinge.
9. Insert the hinge bracket and screw it to the top of the unit.
10. Use a spanner to tighten it if necessary.
11. Put the hinge cover and the screw cover back.
6. Unscrew and remove the bottom hinge pin with flat screw drivers, turn the bracket over and replace
the pin.
Installation Installation
Rear spacer
Screw the rear spacers at the rear of the unit.
Space Requirement
-Keep enough space of door open.
-Keep at least 50mm gap at two sides.
Levelling the unit
Adjust the two levelling feet at front of the unit.
If the unit is not level, the doors and magnetic seal alignments will not be covered properly.
Location
Install this appliance at a location where the ambient temperature corresponds to the climate class
indicated on the rating plate of the appliance.
785mm
775mm
Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C