P.8
操作說明
Operating Instructions
注意：
- 查看插座電壓是否與本機相符。
- 在正式啟動前，重複練習拆裝本機數次。
- 使用本機時切勿打開任何濾蓋，否則電
源會自動切斷以保障安全。
- 在清洗或拆裝前必須先拔掉電源。
- 切勿將機器浸泡於任何液體中。
- 切勿把手指或任何物放入出風口，以免造
成危險或損壞機件。
- 啟動前先拆開過濾網包裝。
Attention:
- Check that if the electrical rating of this appliance
corresponds with the socket.
- Repeat installation steps as practice before
using the appliance.
- Do not open any filter cover during operation or
else the appliance will cut off the power
automatically for safety purpose.
- Unplug the appliance before cleaning or disassembling.
- Do not immerse the appliance or components in
any liquid.
- Do not insert fingers or objects into the inlet or outlet
grille in order to avoid danger or appliance damage.
- Unpack filters before use.
1. Control Panel
ON/ OFF Button
- The appliance will be at stand-by mode after
connecting with power. Press ON/ OFF Button and
it will automatically set to operate at low speed with
an indicative sound.
Purified air will come out from the outlet grille.
- Press ON/ OFF Button again to turn off the appliance.
Speed Button
- There are 4 speed settings,which are:
Sleep, Low Speed, Medium Speed and High Speed
- The appliance automatically sets to operate at Low
Speed after connecting with power. Press Speed
Button to increase the speed and it gives a sound
after each setting change. The Speed Indicator on
display panel also changes accordingly.
- The speed setting follows the cycle of
Low Speed Mode→Medium Speed Mode→
High Speed Mode→Sleep Mode.
Auto Mode Button
- Activate the auto mode by pressing Auto Mode
Button. The Auto Mode Indicator on the display panel
will also be on.
- After activating auto mode, the appliance will first
operate at high speed for 2 hours, which will be
followed by operation at medium speed for another
2 hours, and then low speed for another 2 hours.
- The auto mode follows the cycle of High Speed
Mode→Medium Speed Mode→Low Speed Mode.
Timer Button
- There are four timer settings, which are Continuous
Mode, 1H, 4H and 8H.
- The appliance automatically sets at Continuous Mode
after connecting with power (without indication on
the display panel). Press Timer Button to set the timer
and it gives an indicative sound after each setting
change. The Timer Indicator on the display panel also
changes accordingly.
- The timer setting follows the cycle of Continuous
Mode→1H→4H→8H.
1. 操作面板
開關鍵
- 接通電源後，空氣清新機會處於待機模式，
輕按此鍵會自動設定以低速檔運作，並發出
訊號音，從出風口吹出已過濾的空氣。
- 再按一下此鍵即可關機。
風速選擇鍵
- 風速設四檔，即睡眠、低速、中速及高速。
- 開機後自動設定以低速檔運作，每按一下檔位
依次提高一檔，顯示面板中的風速顯示燈亦同
時依次改變 ，每次更改設定會發出訊號音。
- 風速選擇功能按此循環運作：
低速檔→中速檔→高速檔→睡眠模式。
自動模式鍵
- 開機後按此鍵以啟動自動模式，顯示面板中
的自動模式顯示燈亦會亮起。
- 啟動此功能會以高速檔運行兩小時，再以中
速檔運行2小時，然後再以低速檔運行2小時。
- 自動模式功能按此循環運作：高速檔→中速
檔→低速檔。
時間設定鍵
- 時間設定功能設四檔，即連續、1H、4H及8H。
- 開機後自動設定以連續模式運轉(於顯示面板中
不會有任何顯示)。每按此鍵一下依次前進一
檔，顯示面板中的時間設定顯示燈亦同時依次
改變，每次更改設定空氣清新機會發出聲響。
- 時間設定功能按此循環運作：
連續→1H→4H→8H。
AUTO
AUTO
