background image

Operating Instructions

P.7

Product Structure

P.6

Control Panel

SPEED Button 

  

The working speed range is Speed Level 1 to 8, each press of the   or   button represents an increase or 

decrease of one speed selection. The digital screen displays “1,2,3,4,5,6,7,8”, non-recyclable (Press 

 button 

continuously to Speed 8, press   button again, the speed display on the digital screen stays on Speed 8, the value 

of speed decreases only when   button is pressed; meanwhile, press   button is pressed. When the speed display 

on the digital screen is Speed 1 and the   button is pressed again, the speed display remains as Speed 1; the 

value of speed increases only when   button is pressed ); and the pattern of speed adjust as follow:

The preset speed is non-recyclable : speed “+”  1 → 2 → 3 → 4 → 5 → 6 → 7 → 8

PULES Button 

This button is for manual operation, under this programme, only when keep pressing the button can the unit start 

working, and when the button is loosened, the unit stop working. The motor soft boots to work in maximum speed 

(Speed 8), pulse programme is available except under energy-saving mode. Operation mode: in standby mode or 

other working mode, press Pulse button to enter Pulse programme. The screen display: Speed “Speed 8”, the time 

display counts from 1 to 59 standing for 1-59 seconds. On the 60th second, the screen displays 1 (stands for 1 

minute, it displays behind the first “8” on the time display area, as follow 

), when working time exceed 1 minute, 

time display changes by every minute; the unit stops working when the button is loosened.

Indicator: The blue light flashes while the unit is working, and stay lit while it stop working.

RUN/STOP Button 

This button is an on and off switch for preset programme, which is to control the custom operation to run, and 

also to control the custom operation and vegetables programme to stop. During operation, blue light on the “RUN/

STOP” indicator flashes; when the unit stops, the blue light stay lit.

Vegetables Programme Button 

This is a vegetable preset programme, the working procedure is: Speed H for 30 sec, pause for 2 sec; Speed 6 for 

10 sec; pause for 2 sec; Speed H for 60 sec, pause for 2 sec; Speed 6 for 10 sec, end. The total time is 1 minute 

and 56 seconds. This programme soft boot for each time.

During operation, blue light on the “VEGETABLES” indicator flashes (until the programme comes to an end). When 

the unit stops working, the blue light stays lit.

LCD Display: the timer counts down from 1 min and 56 sec. From 1 min and 56 sec to 1 min, the time indicator 

flashes with “1”; from 59 sec to 0 sec, the time indicator displays countdown in 1 second intervals while the speed 

indictor shows the speed accordingly. 

RUN/STOP button again. It can also turn to Pulse programme by pressing Pulse button.

While working or choosing programme, the blue light flashes, and it stays lit when it stops working.

ON/OFF Button  

This is a ON/OFF switch for the product, press 

 button under energy-saving mode, the unit turn to standby 

mode, 

 red light stay lit (not flash), and blue lights of PULSE button, RUN/STOP button and “VEGETABLES” 

button stay lit. LCD display: No display for time and speed display Speed 1. Under working mode or standby mode, 

press the button again to turn to energy-saving mode.

During operation, the blue light flashes; and the red light stay lit when it stop working.

The LCD display has a blue background and black text.

Make sure the electrical rating shown on the rating label corresponds with your home power supply before plugging in 

the appliance.

TIME Button 

  

Every press of the   button represents an increase of 1 minute, and every press of the    button represents a 

decrease of 1 minute. By pressing the 

 button for 3 seconds, the time changes three times per second and each 

change is 1 minute. The maximum preset time is “10”. When the time display indicates “00”, the unit will not operate.

Time Adjustment Cycle 

Under no circumstances will the unit run continuously without stopping.

Repeat Cycle unavailable during operation: Time “+” → 01 → 02 → 03 → 04 → 05 → 06 → 07 → 08 → 09 → 10;

Repeat Cycle when idle: Time “+” 00 → 01 → 02 → 03 → 04 → 05 → 06 → 07 → 08 → 09 → 10 → 00;

Time Button

Pulse Button

ON/OFF Button

Speed Button

Vegetables Programme Button

Custom RUN/STOP Button

Speed Indicator

Time Indicator

Operating Instructions

Important

- Do not run the appliance without loading. It is strictly forbidden to operate this appliance without the presence of  

  any liquids, solids or semi-solids inside the blending jar.
- Under no circumstances should the blending jar be submerged in any liquids. Do not spray or splash any liquids at 

   the blending jar base. Do not directly rinse the blending jar base under the tap. The blending jar is not suitable for 

   the dishwasher. If the blending jar base is sprayed or splashed wet, dry immediately. 

- Under no circumstances should the blending time exceed 1 minute when dry-grinding. It is advised to 

let the   

  appliance rest for 5 minutes before resuming dry-grinding. 

Summary of Contents for PRO-ZD801
















Reviews: