German pool PRO-6S, Operating Instructions Manual

Page: 10 / 20

Care & Maintenance
P.10
Specifications are subject to change without prior notice.
If there is any inconsistency or ambiguity between the English version and the Chinese version, the English version shall prevai
l.
Model No PRO-6S
Voltage / Frequency 220-240 V ~ 50-60 Hz
Rated Power 1,680 W
Dimensions (H) 530 mm
(W) 240 mm
(D) 260 mm
Technical Specifications
- Power plug must be disconnected before cleaning and repair.
- Clean surface of the blender jar with soft cloth or sponge. The measuring cup and the seal ring can be
detached for cleaning.
- The blender jar can be rinsed with water.
- The seal ring is detachable from the lid for easy cleaning.
- After cleaning, put the blender jar on the side or upside down (Note 1) to dry
*
. Do not immerse the
whole jar in water.
- Do not immerse the unit base or power cord into water or other liquids. Clean the unit base by soft cloth.
*
To dry the blender jar in upside down position, please remove the residual water with a dry cloth. Do not position it near the sink or basin to avoid water
spraying to the bottom part of the jar. This may cause rusting of the bearing and thus affect the performance of the blender.
A Friendly Reminder :
To effectively remove dirt on the jar and blades and help them last longer, do the following: add in water
and lemon, close the lid and then press “Pulse ” button for 2 to 3 times. Replace liquid with clean water
and repeat the above step.