German pool PRO-12S, User Manual

Page: 9 / 20

Care & Maintenance
P.9
- Unplug the appliance from the wall outlet.
- Power plug must be disconnected before cleaning and repair.
- Do not immerse the unit base or power cord into water or other liquids.
- Clean surface of the blender jar with a soft cloth or a sponge. The measuring cup and the seal ring can be
disassembled for cleaning.
- The blender jar can be rinsed with water. It can also be cleaned by filling 2 cups of water in the blender jar,
close the lid and then operate the blender in Pulse mode. Then pour out the water and dry it with soft cloth.
- After cleaning, put the blender jar on the side or upside down (Note 1) to dry. Do not immerse the
whole jar in water.
- Clean the unit base using a soft cloth. NEVER immerse it in water or other liquid.
Note 1: If the blender jar is put in an upside down position, please remove the residual water by dry cloth.
Do not leave it close to the sink or basin to avoid water spraying to the bottom part of the jar.
This may cause rusting of the bearing which can affect the performance of the blender.
3Easy Steps to Wash the Blender Jar
Caution: Do not immerse the blender jar into water
1. Add 1-2 slices of lemon into 750ml water. Select the“Vegetable” Programme.
2. Pour out water. Repeat Step 1.
3. Pour out water, and wipe it dry with a clean cloth. Put the jar sideways and leave it alone to dry
naturally.
Specifications are subject to change without prior notice.
If there is any inconsistency or ambiguity between the Chinese version and the Engilsh version, the Chinese version shall prevail
.
Refer to www.germanpool.com for the most up-to-date version of the Operating Instructions
.
Model No PRO-12S
Voltage / Frequency 220-240V / 50-60Hz
Rated Power 1,680 W
Dimensions (H) 525 mm
(W) 246 mm
(D) 275 mm
Technical Specifications
A Friendly Reminder :
To effectively remove dirt on the jar and blades and help them last longer, do the following: add in water
and lemon, close the lid and then press “Pulse” button for 2 to 3 times. Replace liquid with clean water
and repeat the above step.