P.31
Fig 9
Installation Instructions
Continuous drainage
1. Screw off the drain-cover & unplug the water stopper.
2. Connect drain-hole with φ12mm drain hose, as deep as possible to avoid leakage.
3. Pull the drain hose to bathroom or outdoor.
Notes:
- Drain hose must be installed when there’s no water in the tray.
- It is suggested that not to use continuous drainage when unit is in COOL mode, to ensure enough water
recycle in the unit to enhance the system cooling effects.
- It is suggested that to adopt continuous drainage when unit is in HEAT mode, to avoid frequent drainage.
- Put the drain hose in an inaccessible place, not higher than drainage hole and keep drain hose straight
without any flexure.
- Keep the drain cover and its stopper properly when continuous drainage is adopted.
Drain Cover
Drain hose
