P.9
Method 2: Install Directly On The Wall
1. Drill two holes into the wall, and keep the distance between the two plugs at
148mm;
2. Fix the rubber plugs into the two holes.
3. Then attach two screws into the rubber plugs. The distance from the screws to
the wall should be 10mm to ensure sufficient space.
Installation Instructions
10mm
148mm
drill two
Φ6mm holes, depth 29mm
4. Finally hang the heater on the two screws: Aim big hole at two screws and then
turn right to lock securely into small hole. (see diagram below)
Big hole
Small hole
Small hole
Big hole
HTW-110_M_20(1).indd 9
HTW-110_M_20(1).indd 9
8/10/2020 17:47:14
8/10/2020 17:47:14