P.13
Maintenance
1. If the product won’t be used for a long time, pull out the power plug, pack the
heater and prevent dust from entering.
2. Before packing, make sure that the outer surface and the filter are dry.
3. After packaging, product should be stored in a dry and ventilated place.
Care & Maintenance
WARNING!
Before cleaning, be sure to turn off the power and unplug the power plug,
or else it may cause electric shock.
Cleaning The Surface
1. Clean the surface of the heater with a damp cloth (or moistened with mild &
detergent). Do not rinse directly with water. Do not use gasoline, thinner, or corrosive
detergent or solvent.
2. If too much foreign matter adheres to the filter screen, it will affect the air flow, so
it should be cleaned at least every other month.
Cleaning The Filter
1. Remove the filters in order (refer to diagram below).
2. Immerse the filter in cleaning agent for a few minutes and then wash and dry it.
3. Re-install the filter properly.
Filter
Mesh Cover
HTW-110_M_20(1).indd 13
HTW-110_M_20(1).indd 13
8/10/2020 17:47:14
8/10/2020 17:47:14