background image

P.8

P.8

清潔與保養 

Care & Maintenance

 

• 清潔前必須先拔下電源插頭。

• 任何污垢必須即時清理。

• 必須待爐面完全冷卻才進行清潔。

• 清潔面板時,先以扭乾的濕布擦拭;若仍 
    未能除掉污漬,可用中性去污粉或洗潔精 
    擦拭,然後再用濕布擦拭即可。

• 清潔電磁爐機身時,先用柔軟濕布擦;若 
    有油污難以清除時,用中性洗潔精擦拭後 
    再用濕布擦拭乾淨。

• 切勿用水直接沖洗或將機身浸入水中清洗。

• 切勿使用堅硬之刷子刷洗爐面。

• 切勿使用有機溶劑或苯等化學藥品擦拭電 
    磁爐。

Power plug must be disconnected before cleaning.

Any stain or deposit on the cook-top surface must 

be cleaned off immediately before reusing.

Cleaning must be done when cook-top surface has 

completely cooled down.

To clean the cook-top, wipe with a dry cloth. If 

stain remains, clean with a moist sponge   
soaked with mild soap, and then wipe again with 
a moist cloth.

To clean the body of induction cooker, wipe with a 

soft moist cloth. If stain remains, clean with a 
moist sponge soaked with mild soap, and then 
wipe with a moist cloth.

Do not immerse induction cooker into water.

Do not clean cook-top with any rough cloth or 

abrasive tool.

Do not use organic solvents or any cleaning 

products that contain chemicals such as Benzene.

  Note  :  Over time, cook-top panel may be 
      discoloured due to one of the following 
      situations. Operation of induction cooker 
      would not be affected as this is normal.

     

Overheating or burning empty cookware 

     

Spillage not cleaned immediately

     

Cookware not clean

     

Long period of usage

  注意︰ 以下幾種情況會造成玻璃面板變色, 
     

  實屬正常,不會影響電磁爐正常使用﹕

     

 

•加熱乾燒時

     

 

•加熱湯水外溢未能及時擦淨

     

 

•使用不潔淨底部鍋具加熱時

     

 

•長時間使用

Summary of Contents for GIC-GS20P













Reviews: