P.11
操作說明
Operating Instructions
5.
Your weight, body fat % (BF) then total body
water % (BW) are displayed. Next your Calories
(KCAL), muscle mass % (MM) and bone mass %
(BM) are displayed sequentially twice.
B. To Turn Off the Scale
To turn the scale off, press the ON/OFF key while
programming data. Or, if no key has been pressed
for a few seconds, the scale turns off automatically.
5. 顯示您的體重、脂肪%（BF）及總水分%
（BW），接著顯示您的卡路里（KCAL）、
肌肉%（MM）及骨重%(BM)，依次連續顯
示兩次。
B. 關機
在編輯個人信息時，按ON/OFF鍵關機；
在無操作狀態下數秒後，磅秤自動關機。
常見故障及處理
Troubleshooting
無重量顯示
No weight is displayed?
請檢查電池是否有電。如果不是，請參照“操作說明”部分。
Check if the scale is powered up and started up. If not, please refer to
the Section “Operating Instructions”.
螢幕顯示“Lo”
The display reads “Lo”
低電顯示，請更換電池。
Battery is running low. Replace the battery.
螢幕顯示“Err0”
The display reads “Err 0”
歸零異常。從磅上下來，待自動關機後，請重新輕按磅面進行初始
化，螢幕顯示“0000”後自動關機，初始化完成。
Initialization error. Step off the scale and wait until the scale is
automatically switches off. Start the scale again by pressing lightly on
the scale platform to re-initialize the scale. The scale is ready for use
again.
螢幕顯示“Err1”
The display reads “Err 1”
不穩定異常。從磅上下來，待自動關機後，重新站在磅上進行稱重，
並注意在稱重過程中保持靜止不動。
Instability error. Step off the scale and wait until the scale automatically
switches off. Step on the scale to repeat the measurement again,
standing still while computation is in progress.
稱重過程中，螢幕顯
示“Err2”
The display reads “Err 2”
when measuring
超重預警。立即從磅上下來，否則將對磅秤造成永久性傷害。
Overload warning. Remove the weight immediately; otherwise,
permanent damage to the scale will occur.
