25
F.
SOURCE:
Press the
SOURCE
+
button to cycle through the inputs in the same order as when the
SOURCE
control is rotated in a clockwise direction. Press the
SOURCE -
button to cycle through the
inputs in the same order as when the
SOURCE
control is rotated in an anticlockwise direction.
13. AMPLIFIER BREAK-IN
Like all audiophile equipment, German Physiks electronics require a break-in period from new before
they reach their optimum level of performance. Initially the sound may seem harsh. Please do not be
concerned. The sound will become more relaxed and smoother as the break-in progresses. Break-in
should largely be complete after two or three days of use.
14. CARE OF YOUR AMPLIFIER
NEVER remove the product’s covers. This product contains no user serviceable parts.
NEVER attempt to clean the unit with any abrasive materials or any cleaners containing
ammonia, alcohol or other solvents,
as these may damage the finish. Solvents may also
constitute a fire hazard.
ALWAYS disconnect the unit from the mains supply before attempting to clean it.
The only maintenance the unit will require is periodic dusting to remove dust and any finger prints from
the chassis. Please use the cleaning cloth supplied with the unit. This cloth should be used dry. Do not
use any form of liquid with it. Additional cloths may be obtained from your local German Physiks dealer,
national distributor, or direct from German Physiks.
15. FUSES
NEVER use any fuses other than the types shown below. To do otherwise risks creating
electrical shock and fire hazards, with potentially fatal consequences.
If you suspect that the unit has blown a fuse, you must consult a qualified service technician. Do not
attempt to replace the fuse yourself as the cause of the failure must be investigated in order to prevent
a reoccurrence of the problem and possibly more serious damage. This will not be covered by the
warranty.
The unit uses two of each of the fuses shown in the table below.
Supply voltage
Fuse #1
Fuse #2
115V or 230V
SGSITR1T25
Siba 1660x0.1,25
IEC60127-3/4 1.25A 250V time-lag
SGSICG16T0
Eska 632.330
IEC60127 16A 250V time-lag