24
12. REMOTE CONTROL
This remote control will work with all the Emperor series amplifiers and also the Emperor CD player.
A.
Select:
To use the remote with an Emperor amplifier, press the
Select
button, once or twice, so that
the
AMP
LED, figure 7 B, illuminates briefly.
B.
AMP LED:
Illuminates briefly when
Select
button pressed to show that the remote is set to control an
Emperor amplifier.
C.
Standby | On:
Use this button to wake the unit from and return to standby. When the unit is running
and the
Standby
button is pressed, the volume level is automatically reduced to zero, the unit is muted
and it then enters the standby mode. When the
Standby
button is pressed again, after waking from
standby, the unit is unmuted and the volume level is returned to its previous setting. This may take a few
seconds.
D.
VOL:
Press the
VOL
+
button to increase the volume level and the
VOL -
button to decrease the
volume level.
E.
MUTE:
Use this button to mute and unmute the unit. When the unit is running and the
Mute
button is
pressed, the volume control level is automatically reduced to zero and then the unit is muted. Pressing
the
Mute
button again reverses the process. This may take a few seconds.
A
C
B
D
E
F
Figure 7. Emperor remote control.