GLP
German Light Production
(V1.11)
19
5
Change the Lamp
For a troublefree operation please read this chapter carefully and follow all instructions.
5.1 Safety
Regulations
•
Pull out the main plug!
•
Wait at least 20 minutes after the last operation to cool down the fixture.
•
Don’t touch the bulb of the lamp with bare fingers (this can cause damages).
•
Before you put the
M
M
I
I
N
N
I
I
P
P
A
A
T
T
E
E
N
N
D
D into operation close the casing, otherwise
your retina can be hurt!
5.2 Realize the Lamp Change
1. Pull out the main plug!
2. Open the 3 screws (A, B and C) at the lamp sheet and remove it.
3. Remove the old or broken lamp out of the socket.
Attention: The glass bulb of the lamp can splinter. For that reason remove the
lamp with safety gloves or some cloth.
4. Put in the new lamp securely into the socket. Attention: Use only the original
lamp type!
5. Close the
M
M
I
I
N
N
I
I
P
P
A
A
T
T
E
E
N
N
D
D in reverse order.
5.3 Lamp
adjustment
The optimum position of the lamp (no
Hot-Spot and maximum brightness)
inside the reflector must be controlled
after every lamp change.
The
M
M
i
i
n
n
i
i
P
P
A
A
T
T
E
E
N
N
D
D lamp holder is
aligned at the factory. Due to differ-
ences between lamps, fine adjustments
may improve light performance.
Pease follow this procedure:
