background image

Introduction 

Thank you for purchasing 

your 

Gerbing Li-Polymer Battery models 

Bk5Ah or BK10Ah.

 Please read

 

the 

instructions prior to use. Gerbing Li-Polymer Battery is a slim and lightweight external battery pack that 
will allow you to power a variety of heated products. 

Features 

Ultra-lightweight construction reduces bulk and weight

LED battery 

level 

gauge

LED power level indicators

WARNING 

Do not attempt to disassemble or alter any part of this product.

Do not store below -4° F (-20°C) or above 140°F (60°C).

Do not allow this product to have contact with water or other liquids.
If water or other liquids enter the battery interior, immediately unplug the product from the battery.

 

Continued use of the product may result in fire or an electrical shock.

Do not place this product near an external heat source or expose the battery to direct flame or heat,

 

as the battery may explode.

CAUTION 

Failure to charge battery prior to use will reduce battery life. CHARGE BATTERY REGULARLY: 
It is important to maintain at least 25% of your battery power when not in use. Failure to do this will 
result in performance problems and reduced battery life. 
Be certain to use your battery with products having an amp rating less than the maximum capacity 

output rating for the battery. Please check your product’s amp draw before connecting battery pack. 

Failure to do so can overheat the battery causing damage. 

This battery cannot be used with a product that has it's own built in temperature controller button.

Charging the 

Batteries

 - Always use the charger provided with your battery

To set up the charging process, proceed as follows: 

1.

Locate the input cable connector for the charger.

2.

Plug the AC power cord into a properly rated AC outlet.

3.

Plug the chargers output cord into the battery output port.

4.

The battery power level indicator LED is 

green when it’s fully charged or red if charging is

 

needed.

5.

Charge battery until the red LED on the charger is a green color and the number 9 LED on the

 

battery 

is illuminated. The battery is now fully charged.

Cont’d/……………..

 

Reviews: