User Manual
Spirostik
SPIROSTIK_MAN_ENG_V1.2.2_REV01.DOCX
Page 11
2.2.2.3
Connecting the Flow sensor into the handle
In order to ensure the safe function of the Spirostik, the flow sensor
must be connected correctly to the handle. Please read the following
procedure carefully.
Place the flow sensor in the ‘mouth’ of the grab handle, ensure the
flow sensor is straight and the two guidance ribs are either side of
the connector, with a firm pressure push the flow sensor into the
handle, this should ‘snap’ into place with the connector holes lined
up with the pressure double hose.
Examine that the flow sensor to ensure it is correctly engaged in the
handle: 1: Upper section of the handle must be accurately between
the two guidance ribs of the flow sensor.
2: The locating spigot must be located securely in the opening of the
guidance rib on the patient side of the flow sensor.
