geratech EGE-UHD2-4HDB-848L, Manual

Page: 16 / 24

EGE-UHD2-4HDB-848L
8×8 HDMI 4K UHD over CAT5e/6/7 Matrix,
60m with 24V PoC, IR,& HDCP 2.2, Light Version
11
6.9 WebGUI Control
On a PC/Laptop which is connected to an active network system, open a web browser and
type device’s IP address (available from LCM monitor or OSD menu) on the web address
entry bar. The browser will display the device’s Switch, Data Routing, EDID Settings and
System Settings.
Click 'Switch' page to switch Input and output setting.
Click on 'Data Routing' page to set up Output Baud rate and Uart Routing status.