geratech EGE-UHD2-4HDB-848L, Manual

Page: 12 / 24

EGE-UHD2-4HDB-848L
8×8 HDMI 4K UHD over CAT5e/6/7 Matrix,
60m with 24V PoC, IR,& HDCP 2.2, Light Version
7
6.6 RS-232 Protocol
MATRIX REMOTE CONTROLLER
Pin Assignment Pin Assignment
1 NC 1 NC
2 TX 2 RX
3 RX 3 TX
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 115200bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
6.7 RS-232 and Telnet Commands
COMMAND DESCRIPTION PARAMETER
AN Switch output A to input N. N=1~8
BN Switch output B to input N. N=1~8
CN Switch output C to input N. N=1~8
DN Switch output D to input N. N=1~8
EN Switch output E to input N. N=1~8
FN Switch output F to input N. N=1~8
GN Switch output G to input N. N=1~8
HN Switch output H to input N. N=1~8
IN Switch all outputs to input N. N=1~8
AB…..N Switch output AB... to input N. N=1~8
SETIP <x.x.x.x><x.
x.x.x><x.x.x.x>
Set IP, SubNet and Gateway
(Static IP)
X=0~255
IPCONFIG Display the current IP
configuration
NONE
RSTIP Set IP configuration to DHCP None
P0 Power off None
P1 Power on None
STOREN Store current I/O to position N N=1~8
SHOWN Show current port N I/O position N=1~8
PRESETN Preset the store I/O position N N=1~8