EGE-UHD-5HDB-1431
1×4 HDMI over 1 HDMI and 3 CAT5e/6/7 Splitter,
100m with IR,PoC, LAN Serving(not include 507RX)
4
6.2 Rear Panel
MODE
LINK
MODE
LINK
MODE
LINK
IR IN
IR OUT
LAN
2
3
1
CAT5e / 6 / 7 OUT
1
2
3
4
1
IR IN: Connect with IR Extender to receive IR signal from Transmitter side and blast out
at Receiver side. Ensure that remote controller being used is within he direct line-of-
sight of the IR Extender.
2
IR OUT: Connect with IR Blaster to blast out the IR signal received from the Receiver
side. Place the IR Baster in direct line-of-sight of the equipment to be controlled.
3
LAN: Connect to intranet or internet service system for a total sharing rate of 100Mbps
within the link of Transmitter.
Warning: DO NOT connect this slot with any of the CAT5e/6/7 port, doing so may
trigger a power shot down and ruin the device.
4
CAT5e/6/7 OUT 1~3: Connect these ports to CAT5e/6/7 to HDMI Receivers (with or
without PoE function) with CAT5e/6/7 cable to extend the signal up to 100m.
6.3 IR Cable Pin Assignment
3
1
3
1
2
2
Power 3.3 V
IR Blaster Signal
NC
IR Signal
Power 3.3 V
Grounding
IR Extender
IR Blaster
