EGE-UHD-5HDB-1431
1×4 HDMI over 1 HDMI and 3 CAT5e/6/7 Splitter,
100m with IR,PoC, LAN Serving(not include 507RX)
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SYNC
LINK
EDID
SERVICE
HDMI IN
POWER
HDMI OUT
DC 24V
STD
TV
1
2
3
4
5
6
8
7
1
HDMI IN: Connect with source equipment such as DVD/Blu-ray or PS3 player.
2
SYNC: This LED will illuminate when the HDMI input port connected to an active
source.
3
HDMI OUT: Connect to HDMI display for instant image display or cascade with another
family type Transmitter.
4
HDMI LINK: This LED will illuminate when HDMI output is connected to TV or display
monitor.
5
EDID STD/TV: The default factory setting is on TV, leave as it is when the display is
properly. The unit will detect the 1st CAT5e/6/7 output’s EDID when it obtain a 4Kx2K
EDID and send out the signal accordingly to other output ports. If the 1st CAT5e/6/7
output is without a 4Kx2K's EDID the unit will detect all output's EDID and send out the
signal that all outputs can accept.
This device obtain the last memory function therefore, the device will use the last
output port 1's EDID when output port 1 is not connected to a display after power cycling
or switch in between the EDID setting.
Switch to STD to use build-in EDID if the display has problem. STD EDID's video at
1080p@60Hz and audio at LPCM 2CH.
6
SERVICE: This slot is reserved for factory service only.
7
POWER LED: Once the power supply is connected the LED will illuminate
8
DC 24V: Plug the 24V DC power supply into the unit and connect the adaptor to an AC
outlet.
