EGE-UHD-444
4x4 4K UHD HDMI Matrix
4
6.2 Rear Panel
1
INPUT 1~4:
Connect to HDMI equipped source devices such as DVD/Blu-ray players,
set-top boxes or games consoles.
2
OUTPUT A~D:
Connect to an HDMI TVs/displays or monitors for display of the selected
source signal.
3
IR IN:
Connect the supplied IR extender for IR signal reception from the remote control
included in the package. Ensure that the remote is within the direct line-of-sight of the IR
Extender.
4
RS-232:
Connect to a PC/laptop or RS-232 control system with a D-sub 9-pin male
cable to control the unit with RS-232 commands (see Section 6.6).
5
CONTROL:
Connect to an active Ethernet link with an RJ45 terminated cable to control the
unit with WebGUI.
6
SERVICE:
This slot is for firmware update use only. Power on the unit and connected to
PC/Laptop, use Telnet/RS232 command to type "update mcu", then connect the USB flash
driver which content firmware file in Root directory. then the power LED will be blinking
which represent the update is being processed. Once the update is done the device will be
reboot automatically.
7
DC 5V:
Connect the 5V DC power supply to the unit and plug the adaptor into an AC
outlet.
