EGE-UHD-444
4x4 4K UHD HDMI Matrix
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1
IR Window:
Accepts the remote control signal of this matrix only.
2
POWER Button and LED:
Press this button to power the matrix on/off. The LED will
light up in green when the power is on and in red when put it into standby mode.
3
EDID Button and LED:
Press this button to select external or standard EDID. When
the LED illuminate it represent the external EDID is selected. External EDID is base on
output A to inputs 1 and output B to input 2 and so on... For example, when all outputs
select input 1, the source will based on output A's highest EDID and send out the signal
corresponsively. Under this same scenario, if only output A supports 4K2K then other
outputs will have no image. Select standard EDID which supports 720p/2CH to allows
all outputs with image display.
4
OUTPUT A~D Buttons and LEDs:
Press the 'A', 'B', 'C' or 'D' button to select the
source (1~4) for that output, the corresponding LED will light to indicate the selected
source.
