Important Note:
The ratio to analyze the results in the Gold Hunter
Smart is as follows:
If the result of the noise is high and the target confirmation rate is
low: The device does not give depth, it is rather to retry the search
again.
If it gives us depth and the noise percentage is greater than
30%
It is
preferable to try the search again.
if the target confirmation rate is less than
90%
it is recommended to
try the search again.
The following results and conditions will appear on the device screen
when confirming the presence of a target:
Noise
:
It is the percentage of noise in the search area, which results
from the proximity of (energy sources - phone networks - metals -
mobile phones - electronic devices)
Target confirmation:
the percentage of confirmation of the presence
of the target in the search area.
Depth:
The depth within which the target is likely to be located.
Example
: the depth is between
160 cm to 202 cm
.
-Noise
5%
- Target confirmation
99%
-In addition to
a(2D) two-dimensional
figure that expresses the
percentage of void or metal within the detected target.
18
Summary of Contents for Gold Hunter
Page 1: ......
