Note:
Before the
Ready LED
is on again, do not unplug the power
cable; otherwise the loading of default values will fail.
1. Press and then release the
Reset
button immediately.
2. Press and hold the
Default
button until the Ready LED blinks. This
may take up to 30 seconds. The Ready LED will blink twice.
3. Release the
Default
button. The process of loading default values is
complete, and the GV-Video Server starts rebooting itself with the
Ready LED turning off.
4. Wait until the Ready LED turns on again. After this all the settings are
returned to default values
GV-VS2420 / 2400
5
4
