1. Press and then release the
Reset
button immediately.
2. Press and hold the
Load Default
button until all 3 LEDs (Power,
Ready and Disk Full/Fault) are on. This may take about 30 seconds.
3. Release the
Load Default
button. The process of loading default
values is complete, and the GV-Video Server starts rebooting itself
with all 3 LEDs turning off.
4. Wait until the Power and Ready LEDs turn on again. After this, all the
settings are returned to default values.
Directly on the GV-Video Server:
GV-VS04H / GV-VS14
2 1
4
