When the connection with the storage system is established, the status changes
into “Connected”. At this step, you can already use the iSCSI disk by the operation
similar to the case to increase a local disk. Refer to step 13.
If the iSCSI data port 2 is used for connection to the DVR host, click
Details
and
keep on the following steps.
7.
Click
Connections
.
8.
Click
Add
.
9.
Click
Advanced
.
10.
Select
Target Portal
to iSCSI data port 2, set up the CHAP authentication if
necessary and click
OK
.
11.
Now you can see the status of both Source Portals displays “Connected”. Click
Apply
.
12.
(Figure: In this example, the iSCSI data port 2 is 192.168.0.171.)