Quick Start Guide
After the power is turned on, the GV-NVR System Lite will search for GV
IP cameras with the default settings. You can then choose to set up the
channels automatically or manually. With automatic setup, the GV IP
cameras will be randomly assigned an IP address and displayed on the
main screen without any further configuration.
●
For automatic setup, see
5. Basic Configuration
in the
Quick Start
Guide
.
●
For manual setup, see
3.4 Setting Up IP Cameras
in the
GV-NVR
System Lite User’s Manual
.
●
To connect third-party IP cameras, see
Setting Up Third-Party IP
Cameras
in the
Quick Start Guide
.
Right Side
3
1
2
Note:
The monitor you use must be capable of having a screen
resolution of 1280 x 1024 and display color of 32 bits.
IMPORTANT:
Before you power on the GV-NVR System Lite, make
sure all the devices are connected to the same LAN and the cameras
are powered on.
LAN
Auto Connection
IP Address: 192.168.X.X
Subnet Mask:255.255.255.0
Default IP Address: 192.168.0.200
Subnet Mask:255.255.255.0
5. Using the RJ-45 cable, connect a switch or a hub to the unit.
6. Connect
GV IP cameras
to the same LAN with the unit. Then power
on the GV IP cameras.
7. Using the supplied power adapter, connect the unit to the power
outlet.
