34
3.
Drill the marks and insert the screw anchors.
4.
Thread the power and / or network cable(s) through the oval-shaped
hole or the cable opening on the side.
Figure 2-4
5.
Connect the camera to network, power, a microphone or a speaker,
and one input and one output devices. For details, see
2.5
Connecting the Camera
.
6.
Optionally insert a memory card.
7.
Secure the camera to the ceiling or the wall with the supplied screws.
8.
Access the live view. For details, see
2.1 Accessing the Live View,
GV-IPCam Firmware Manual
.
9.
Adjust image clarity using the GV-IP Device Utility program. For
details, see
2.2 Adjusting Image Clarity, GV-IPCam Firmware Manual
.
