16
2.1.2 Assigning an IP Address
To assign a new static IP address, log in the Web interface to access the network setting
page.
Note:
If your router does not support DHCP, the default IP address will be
192.168.0.10
.
In this case, it is highly recommended that you modify the IP address to avoid IP address
conflict with other GV-IP devices on the same LAN.
1.
Open your web browser, and type the default IP address
192.168.0.10
.
2.
Type your username and password. Click
Login
.
3.
Click
Setup
, select
Common
in the left menu and select
Network
.
Figure 2-2
4.
Select
Static
from the Obtain IP Address drop-down list.
5.
Enter the IP address, subnet mask, and default gateway address. Make sure that the IP
address of the camera is unique in the network.
6.
Click
Save
.