GeoVision GV-EVD2100 Quick Start Manual Download Page 8

Page: 8 / 129

Options

Optional devices can expand your camera’s capabilities and versatility.

Contact your dealer for more information.

Device

Description

Power Adapter

The power adapter is available for all Vandal Proof
IP Dome. Contact your sales representative for the

countries and areas supported.

GV-PA191 PoE
Adapter

The GV-PA191 PoE adapter is designed to provide
power and network connection to the cameras over
a single Ethernet cable.

GV-POE Switch

The GV-POE Switch is designed to provide power
along with network connection for IP devices. The
GV-POE Switch is available in various models with

different numbers and types of ports.

GV-Mount
Accessories

The GV-Mount Accessories provide a
comprehensive lineup of accessories for installation
on ceiling, wall corner and pole. For details, see

GV-

Mount Accessories Installation Guide

on the

Software DVD.

Summary of Contents for GV-EVD2100


































































































































Search results

Summary of Contents for GV-EVD2100

Reviews:

Brands by name

Popular brands

GeoVision GV-EVD2100, Quick Start Manual

Search results

Summary of Contents for GV-EVD2100

Reviews:

Brands by name

Popular brands