Target Vandal Proof IP Dome
5
D.
Thread an Ethernet cable / adapter wire through part 1 of the
connector. According to the below situation, replace the
connector if necessary.
For users of PoE with a Cat.5 Ethernet cable, stay with 1a
connector on the camera body.
For users of PoE with a Cat.6 Ethernet cable, change the
1a connector to the supplied Waterproof rubber set (1b).
For users of DC 12V, change the 1a connector to the
supplied Waterproof rubber set (1c). Remove the terminal
block from the power adapter and thread the adapter wire
through the rubber.
For adapter wire
For Ethernet cable
For Cat.5 Ethernet
cable (PoE)
For Cat.6 Ethernet
cable (PoE)
1a
1b
1c
Figure 5-7
E.
Thread the Ethernet cable and/or the adapter wire through part 2
and 3 of the connector.
Figure 5-8
91
Summary of Contents for GV-EVD2100
