manualshive.com logo in svg

GeoVision GV-EFER3700 Series, User Manual, Page: 69 / 208

Share
Download
GeoVision GV-EFER3700 Series User Manual Download Page 69

 

Introduction

 

 

55

1 

1.7.5  GV-FER5700 / 5701 / 12203 

GV-FER5700 / 5701 / 12203 comes with a data cable that allows you to connect to the 

power adapter, WiFi adapter or USB hard drive, microphone, speaker, and any I/O devices. 

 

Figure 1-68 

 

Note:  

1. 

AC 24V is not supported by GV-FER5700 / 5701. 

2. 

GV-FER12203 currently does not support GV-WiFi Adapter V2. 

 

Connecting to Power 

There are two ways to supply power to the camera: 

 

Use a Power over Ethernet (PoE) adapter to connect the camera to the network, and 

the power will be provided at the same time.  

 

Plug the power adapter to the terminal block on the data cable.  

  

Connecting to I/O Devices  

For details, see the same topic in 

1.7.6 GV-EFER3700 / EFER3700-W

.  

 
 

Summary of Contents for GV-EFER3700 Series

















































































































































































































Reviews:

No comments