Home
/
GeoVision
/
GV-EFER3700 Series
/
User Manual

GeoVision GV-EFER3700 Series, User Manual, Page: 176 / 208

Share

Page: 176 / 208

GeoVision GV-EFER3700 Series User Manual Download Page 176

162

6.1.2 Using the GV-IP Device Utility

The GV-IP Device Utility provides a direct way to upgrade the firmware for multiple cameras.
Note the computer used to upgrade firmware must be under the same network of the camera.

1. Download and install the GV-IP Device Utility program from the company

2. Double-click the

GV IP Device Utility

icon created on your desktop.

3. Click the

Search

button

to locate the available cameras on the same LAN. Or click

the

New

button and assign the IP address to locate the camera over the Internet. Or

highlight a camera in the list and click the

Delete

button to remove it.

4. Double-click a camera in the list, and on the pop-up dialog box, click the

Firmware

Upgrade

tab. This dialog box appears.

Figure 6-3

5. Click the

Browse

button to locate the firmware file (.img) saved at your local computer.

6. If you like to upgrade all cameras of the same model in the list, check

Upgrade all

devices

.

7. Type

Password

, and click

Upgrade

to process the upgrade.

«
...
174
175
176
177
178
...
»

Summary of Contents for GV-EFER3700 Series

















































































































































































































Reviews:

No comments