GeoVision GV-BX2802, User Manual, Page: 55 / 80

48
Click the “Draw Area” button and then click around the area where you want to set as the
alarm area in the image on the left side (the alarm area should be a closed area). Click the
“Stop Draw” button to stop drawing. Click the “Clear” button to delete the alarm area. Click the
“Save” button to save the settings.
3. Set the schedule of heat map. The setup steps of the schedule are the same as schedule
recording setup (See 4.1.4.1 Schedule Recording Settings ).
4. View the heat map data (click Statistics
→
Heat Map). Set the start time and the end time.
Click
“Count” to view the heat map as shown below. The default heat map is people flow
data display. Click
“Motor Vehicle” or “Non-motor Vehicle” to view the corresponding
data.