Accessing the Camera
73
7
IMPORTANT:
1. If
Dynamic IP Address
or
PPPoE
is enabled, you need to know
which IP address the camera will get from DHCP server or ISP
to log in. If your camera is installed in the LAN, use the GV-IP
Device Utility to look up its current dynamic IP address. See
7.2.1 Checking the Dynamic IP Address
. If your camera uses a
public dynamic IP address via PPPoE, use the dynamic DNS
Service to obtain a domain name that is linked to the camera’s
changing IP address first. For details, see
LAN Configuration
and
Advanced TCP/IP
sections,
Administrator Mode
Chapter in
the
GV-IPCAM Firmware Manual
.
2. If
Dynamic IP Address
or
PPPoE
is enabled and you cannot
access the camera, you may have to reset the camera to its
factory default and then perform the network settings again. To
restore factory settings, see
10. Loading Factory Default.
