36
2.4.2. Power Connection
Use one of the following methods to supply power to the camera.
Use a Power over Ethernet (PoE) adapter to connect the camera
to the network, and the power will be provided at the same time.
Connect the wires of your power adapter to the DC 12V+ and DC
12V- pins of the 5-pin terminal blocks. See
2.4.1 Wire Definition
.
Voltage Load Expansion (Optional)
The camera can only drive a maximum load of
200mA 5V DC
. To expand
the maximum voltage load to
10A 250V AC
,
10A 125V AC
or
5A 100V DC
,
connect the camera to a GV-Relay V2 module as illustrated below.
Output Devices
Connect to Power
1
2
3
4
5
6
7
8
9
GV-Relay V2
Bullet Camera
COM
Digital In + and Digital Out +
DO1
4-Pin terminal
block
Digital Out -
