Troubleshooting
75
5
GV-Hot Swap DVR V5 won’t turn on.
If your GV-Hot Swap DVR V5 won’t turn on or you don't hear a startup sound or any fan or
drive noise, try these steps:
1. Make sure that you switch on the AC power on the rear panel. Only for 4U (20 / 8 / 4-bay)
models.
4U (20-Bay) Models
4U (8 / 4-Bay) Models
On
Off
Figure 5-2
Off
On
Figure 5-3
2. Make sure that the power cord is properly connected to both GV-Hot Swap DVR V5 and
power outlet. If you are using a power strip, make sure that the strip is powered on.
3. If the problem persists, consult your dealer.
GV-Hot Swap DVR V5 stops responding (aka “crashed” or “froze”).
If your GV-Hot Swap DVR V5 is not responding to your clicking, typing, or mouse movements,
try these steps to get your GV-Hot Swap DVR V5 back on track. Please note that you will lose
any unsaved changes in all open applications.
1. Restart your GV-Hot Swap DVR V5 by pressing the
Reset
button on the front panel.
2. If your GV-Hot Swap DVR V5 is still unresponsive, switch off the
Power
button to shut it
down. Wait 30 seconds and then restart your GV-Hot Swap DVR V5.
4U (20-Bay) / 3U (16 / 8-Bay) Models
4U (8 / 4-Bay) Models
Reset
Power
On/Off
Figure 5-4
Reset
Power On/Off
Figure 5-5