
32
3. Turn on the main power switch on the front panel.
4U (20-Bay) and 3U (16 / 8-Bay) Models
Power Button
Figure 3-6
4U (8 / 4-Bay) Models
Power Button
Figure 3-7
The GV-Hot Swap DVR V5 will run a series of self-tests, and later series of messages may be
displayed as the various hardware and software subsystems are activated. After this is
finished, the GV-System Software (Multicam Surveillance System) should load automatically
and bring you to the main screen display of 8, 16 or 32 cameras.
Note:
1. For 4U (20-bay) and 3U (16 / 8-bay) models, the series of self-tests will take around 20
seconds to 2 minutes, depending on the number of installed hard drives.
2. For 4U (20-bay) and 3U (16-bay) models, the Power LED and the LEDs of HDD Group
A to HDD Group D should shine after power is on. If any of HDD Group LEDs does not
shine, please contact GeoVision.