GeoVision 84-VD870000-001U User Manual Download Page 39

Page: 39 / 106

Accessing the Live View

No.

Name

Function

Full Screen

Switches to full screen view.

5 File

Save

Records live video to the local computer.

--- See

3.4 Video Recording

6 Control

Panel

Adjust these image quality settings:

Video Attribute

Orientation

Flickerless

Shutter Speed

Auto Iris

DN Sensitivity

White Balance

WDR

IR Light

, and

BLC

--- See

3.2 The Control Panel of the Live View Window

7 Pop-up

On the Live View window, right-click the image to have these
options:



Snapshot:

Takes a snapshot of live videos.



Full Screen:

Switches to full screen view.



PIP:

Enables an inset window for a close-up view on the

video. See

3.5 Picture-in-Picture View



Audio:

Receives audio from the surveillance site.



Information:

Shows the information on codec, resolution,

frames per second and transmission speed of the video
stream.

Summary of Contents for 84-VD870000-001U











































































































Search results

Summary of Contents for 84-VD870000-001U

Reviews:

GeoVision 84-VD870000-001U, User Manual, Page: 39 / 106

Search results

Summary of Contents for 84-VD870000-001U

Reviews: