GeoVision 84-VD870000-001U User Manual Download Page 19

Page: 19 / 106

Introduction

No. Name

Description

1 LED

Indicators

The power LED (top) turns on when the power is on and
turns off when there is no power supply. The status LED
(bottom) turns on when the system operates normally and
turns off when an error occurs.

2 Audio

Out

Currently not functional.

3 Line

Connects to a microphone for audio input.

Note:

This interface only works with an external

microphone with power supply.

LAN / PoE

Connects to a 10/100 Ethernet or PoE.

DC 12V

Connects to power.

Rotational Screw

Loosens to rotate the camera.

7 Conduit

Connector

Waterproofs the Ethernet cable.

Note:

Not available for GV-FD8700-FR.

8 Default

Button

Resets the camera to factory default settings. For details,
see

7.2 Restoring to Factory Default Settings

Focus Screw

Adjusts the focus of the camera.

Zoom Screw

Zoom the camera in or out.

Tilt Screw

Loosens the screw to tilt the camera.

12 I/O

Connector

Connects to I/O devices. For details, see

1.6 I/O

Connectors

Built-in Microphone
Connectors

Connects to a built-in microphone to record sound. For
details, see

1.5 Connecting the Camera

Note:

Not available for GV-FD8700-FR.

14 Conduit

Connector

Waterproofs the audio / I/O wires.

Note:

Not available for GV-FD8700-FR.

Memory Card Slot

Contains a micro-SD card (SD/SDHC/SDXC/UHS

I, Class

10) to store recording data.

Summary of Contents for 84-VD870000-001U











































































































Search results

Summary of Contents for 84-VD870000-001U

Reviews:

GeoVision 84-VD870000-001U, User Manual, Page: 19 / 106

Search results

Summary of Contents for 84-VD870000-001U

Reviews: