3
Suspension available after request. Shown here is a
balancer, which will automatically pull the satellite back
to its position after use.
Alternatively the suspension can be at a fixed height
keeping the satellite in place at a predefined height.
In this case a wire is attached to the arm and the
satellite maintaining the desired height.
When mounting using bend and suspension a wire is
placed in the hose to maintain a fixed distance between
bend and satellite. Adjust distance as you wish.
Energy arm with satellite.
Shown with intermediate joint and suspension with
balancer.
2.1 Connect to power
Power connection must be carried out by a trained and
certified electrician.
Recommended transformer effect:
70 W
Connection of elctrical board: Please refer to the docu-
mentation for the speciffic board.
The satellite as seen from above
with the eyelet for the wire.
Extraction
On/off
ø50 mm Flap
valve for High
Vacuum
Tool holder
Compressed air
1x230V, 13A
3x400V, 16A
3.0 User instruction
Pull the satellite down to the desired working height.
After use disconnect the used connections and pull the
satellite down and let it roll back up.
Do not release the satellite before it is in place.
The tool holder i intended for light hand tools only.
4.0 Maintenance
The energy arm does not require further maintenance.
However, the supply connections should be inspected
regularly for leaks/breakage.
