background image

 

33 

 

The Warranty 

 
For a period of one (1) year from date of first sale, product is warranted to be free from 
defects in materials and workmanship. Geotech agrees to repair or replace, at Geotech’s 
option, the portion proving defective, or at our option to refund the purchase price thereof. 
Geotech will have no warranty obligation if the product is subjected to abnormal operating 
conditions, accident, abuse, misuse, unauthorized modification, alteration, repair, or 
replacement of wear parts. User assumes all other risk, if any, including the risk of injury, 
loss, or damage, direct or consequential, arising out of the use, misuse, or inability to use 
this product. User agrees to use, maintain and install product in accordance with 
recommendations and instructions. User is responsible for transportation charges 
connected to the repair or replacement of product under this warranty. 
 

Equipment Return Policy 

 
A Return Material Authorization number (RMA #) is required prior to return of any 
equipment to our facilities, please call our 800 number for appropriate location. An RMA # 
will be issued upon receipt of your request to return equipment, which should include 
reasons for the return. Your return shipment to us must have this RMA # clearly marked 
on the outside of the package. Proof of date of purchase is required for processing of all 
warranty requests. 
 
This policy applies to both equipment sales and repair orders. 
 

FOR A RETURN MATERIAL AUTHORIZATION, PLEASE CALL OUR 

SERVICE DEPARTMENT AT 1-800-833-7958 

 
Model Number:    

________________ 

 
Serial Number:    

________________ 

 
Date of Purchase: 

________________ 

 
 

Equipment Decontamination 

 
Prior to return, all equipment must be thoroughly cleaned and decontaminated. Please 
make note on RMA form, the use of equipment, contaminants equipment was exposed to, 
and decontamination solutions/methods used. Geotech reserves the right to refuse any 
equipment not properly decontaminated. Geotech may also choose to decontaminate the 
equipment for a fee, which will be applied to the repair order invoice. 

 

 

 

 

 
 

 
 

Summary of Contents for 1.66x18





































Reviews: