Connecting Additional IOXs to an IOX-NFCREADER
When connecting additional IOXs to an IOX-NFC
READER
, ensure the USB connector is seated correctly and secure the
connection with a zip tie.
Termination Shunt
The IOX comes with a termination shunt installed in the expansion port. If you plan to
install more than one IOX in a daisy chain, you must remove the shunt from each
device in the line, with the exception of the last IOX connected. The shunt must
remain in the last IOX and secured with a zip tie.
The shunt in the last IOX device ensures the GO device detects and configures the
IOX, as effectively as possible.
Note:
Failure to install the shunt in the last IOX may affect IOX communication.
To ensure the IOX communicates, please secure the shunt with a zip tie.
Driver ID Whitelist
To create a whitelist of authorized drivers for a particular GO device, apply the following custom parameter to the GO
device through MyGeotab:
<Parameter Description="Enable Authorised Driver List" Offset="164" Bytes="8" IsEnabled="true"/>
Once the parameter is applied, the IOX-NFCREADER only accepts driver key tags assigned to an authorized driver. You can
add and remove drivers to/from the whitelist through the Geotab API (
). See the
DriverWhiteListContent object for more details.
The whitelist mode is disabled when the custom parameter is removed from the GO device.
Copyright © Geotab Inc. 2015-2019 - All Rights Reserved | www.geotab.com | Rev 2.13 - 11/2019
® denotes a trademark of Geotab Inc., registered in Canada, the United States and other countries
4